How to Extend the Life of Your Canon Pixma iP4700 Printer with Service Mode Tool Version 1.050
How to Use Canon Pixma iP4700 Service Mode Tool Version 1.050
If you own a Canon Pixma iP4700 printer, you may have encountered a message like "Waste tank full" or "Ink absorber full" on your screen. This means that your printer's internal counter has reached its limit and you need to reset it before you can print again. But how do you do that?
canon pixma ip4700 service mode tool version 1.050
That's where Canon Pixma iP4700 service mode tool version 1.050 comes in handy. This is a software that allows you to reset the counter for the waste ink absorber, which is a sponge-like component that collects excess ink during printing and cleaning cycles. By resetting the counter, you can extend the life of your printer and avoid costly repairs.
In this article, we will show you how to use Canon Pixma iP4700 service mode tool version 1.050 step by step. We will also explain how to put your printer in service mode, how to download and install the software, how to reset the waste ink absorber counter, and how to replace or clean the waste ink absorber pads.
But before we begin, let's take a look at some of the benefits and risks of using this software.
Introduction
What is Canon Pixma iP4700 service mode tool version 1.050 and why do you need it?
Canon Pixma iP4700 service mode tool version 1.050 is a software that allows you to reset the internal counter for the waste ink absorber for Canon Pixma iP4700 and other compatible models. This software was not officially released by Canon, but it was leaked online by some users who managed to get access to it.
You need this software because your printer has a built-in counter that keeps track of how much ink is absorbed by the waste ink absorber. When this counter reaches a certain level (usually around 95%), your printer will display a warning message like "Waste tank almost full" or "Ink absorber almost full". When this counter reaches 100%, your printer will stop working and show an error code like "5B00" or "B200". This is done to prevent ink from overflowing and damaging your printer or causing a fire hazard.
By using Canon Pixma iP4700 service mode tool version 1.050, you can reset this counter and continue printing as normal. However, this does not mean that the waste ink absorber is empty or clean. It only means that the counter is reset to zero. You still need to replace or clean the waste ink absorber pads periodically to prevent ink leakage and ensure optimal printing performance.
What are the benefits of using Canon Pixma iP4700 service mode tool version 1.050?
There are several benefits of using Canon Pixma iP4700 service mode tool version 1.050, such as:
You can save money and time by resetting the counter yourself instead of taking your printer to a service center or buying a new one.
You can extend the life of your printer and avoid wasting ink by resetting the counter before it reaches 100%.
You can print without interruption and avoid annoying error messages and codes by resetting the counter whenever you see a warning message.
What are the risks of using Canon Pixma iP4700 service mode tool version 1.050?
While there are many benefits of using Canon Pixma iP4700 service mode tool version 1.050, there are also some risks that you should be aware of, such as:
You may void your printer's warranty by using this software, as it is not authorized by Canon. If you encounter any problems with your printer after using this software, you may not be able to get any support or assistance from Canon.
You may damage your printer or cause a fire hazard by overfilling the waste ink absorber with ink. If you reset the counter without replacing or cleaning the waste ink absorber pads, you may cause ink to spill over and leak from your printer. This can damage your printer's components, stain your furniture, or even start a fire if it comes in contact with electricity.
You may download malware or viruses by downloading this software from untrusted sources. Since this software was not officially released by Canon, you may not be able to verify its authenticity or safety. If you download this software from a malicious website or a corrupted file, you may infect your computer with malware or viruses that can harm your data or steal your personal information.
Therefore, you should use Canon Pixma iP4700 service mode tool version 1.050 at your own risk and discretion. You should also follow the instructions carefully and take precautions to protect your printer and computer from any potential harm.
How to Put Your Printer in Service Mode
Before you can use Canon Pixma iP4700 service mode tool version 1.050, you need to put your printer in service mode. Service mode is a special mode that allows you to access and modify some of the settings and functions of your printer that are normally hidden or locked. To put your printer in service mode, follow these steps:
Turn off your printer and disconnect it from the power source and the computer.
Press and hold the Resume button (the one with a triangle inside a circle) on your printer.
While holding the Resume button, reconnect the power cord to your printer and turn it on.
Release the Resume button and then press it twice quickly. The green power light should flash twice.
Press the Resume button four more times slowly. The green power light should flash four times.
Press the Power button once to confirm that you have entered service mode. The green power light should stay on steadily.
To check if your printer is in service mode, try printing a test page by pressing the Resume button once. If your printer prints out a page with some information about your printer's model, serial number, firmware version, etc., then you have successfully entered service mode. If not, repeat the steps above until you get it right.
How to Download and Install Canon Pixma iP4700 Service Mode Tool Version 1.050
Where to find the software and how to download it safely
As mentioned earlier, Canon Pixma iP4700 service mode tool version 1.050 was not officially released by Canon, so you will not find it on their official website or any other authorized source. You will have to search for it online on various forums, blogs, or file-sharing websites where other users have uploaded it.
However, be careful when downloading this software from unknown sources, as they may contain malware or viruses that can harm your computer or steal your personal information. To download this software safely, follow these tips:
Use a reputable antivirus software and scan the file before opening it.
Use a VPN (virtual private network) service and a proxy server to hide your IP address and location from potential hackers or trackers.
Use a reliable and secure browser that has built-in protection against malicious websites and downloads.
Read the reviews and comments from other users who have downloaded the software and check for any complaints or warnings.
Download the software from a trusted and verified source that has a good reputation and a high rating.
One of the websites that we found that offers Canon Pixma iP4700 service mode tool version 1.050 for download is [Printer Resetter]. This website claims to provide various resetter tools for different printer models and brands. It also has a tutorial on how to use the service mode tool for Canon Pixma iP4700. However, we cannot guarantee the safety or authenticity of this website or the software, so download it at your own risk and discretion.
How to install and run the software on your computer
Once you have downloaded Canon Pixma iP4700 service mode tool version 1.050, you need to install and run it on your computer. To do that, follow these steps:
Extract the zip file that contains the software to a folder on your computer.
Open the folder and double-click on the file named "iP4700.exe". This will launch the software.
You will see a window with some buttons and options. Do not change any of the settings or click on any of the buttons yet.
Make sure your printer is connected to your computer via USB cable and is in service mode.
If your printer is detected by the software, you will see its model name and port number in the bottom left corner of the window. If not, check your connection and try again.
How to Reset the Waste Ink Absorber Counter with Canon Pixma iP4700 Service Mode Tool Version 1.050
Step-by-step instructions with screenshots
Now that you have installed and run Canon Pixma iP4700 service mode tool version 1.050, you can proceed to reset the waste ink absorber counter with it. To do that, follow these steps:
In the software window, click on the button labeled "Set Destination". This will open a pop-up window with some options.
In the pop-up window, select your printer's region or country from the drop-down menu. For example, if you bought your printer in the USA, select "USA". Then click "OK".
In the software window, click on the button labeled "EEPROM". This will print out a report on your printer's EEPROM (Electrically Erasable Programmable Read-Only Memory), which stores some of your printer's settings and information.
Check the report that was printed out by your printer. Look for a line that says "D = XXXXX" where XXXXX is a number. This is the current value of your waste ink absorber counter. If this number is close to or equal to 100000, then your waste ink absorber is full or almost full.
To reset this counter, click on the button labeled "Clear EEPROM" in the software window. This will clear all the data stored in your printer's EEPROM, including the waste ink absorber counter.
To confirm that the counter has been reset, click on the button labeled "EEPROM" again in the software window. This will print out another report on your printer's EEPROM.
Check the report that was printed out by your printer. Look for a line that says "D = 00000". This means that your waste ink absorber counter has been reset to zero.
To exit service mode, click on the button labeled "Exit" in the software window. Then turn off your printer and disconnect it from your computer.
Here are some screenshots of Canon Pixma iP4700 service mode tool version 1.050 and its functions:
How to print out the EEPROM report and check the counter status
The EEPROM report is a document that contains some information about your printer's settings and status, such as its model name, serial number, firmware version, ink level, print head alignment, etc. It also shows the value of your waste ink absorber counter, which is the main reason why you need to use Canon Pixma iP4700 service mode tool version 1.050.
To print out the EEPROM report, you need to put your printer in service mode and then click on the button labeled "EEPROM" in the software window. This will send a command to your printer to print out the report on a sheet of paper.
To check the counter status, you need to look for a line that says "D = XXXXX" where XXXXX is a number. This number represents the percentage of ink that has been absorbed by the waste ink absorber. For example, if the number is 50000, then your waste ink absorber is 50% full. If the number is 100000, then your waste ink absorber is 100% full.
You should reset the counter before it reaches 100000, as this will prevent your printer from working and displaying an error code. You should also replace or clean the waste ink absorber pads after resetting the counter, as this will prevent ink leakage and ensure optimal printing performance.
How to confirm the reset and exit the service mode
To confirm that the counter has been reset, you need to print out another EEPROM report and check the counter status again. If the number is 00000, then your counter has been reset to zero and you can continue printing as normal.
To exit service mode, you need to click on the button labeled "Exit" in the software window and then turn off your printer and disconnect it from your computer. This will restore your printer's normal mode and settings.
Do not forget to exit service mode after using Canon Pixma iP4700 service mode tool version 1.050, as leaving your printer in service mode may cause some problems or errors with your printer's functions or performance.
How to Replace or Clean the Waste Ink Absorber Pads
Why you should replace or clean the pads after resetting the counter
As we have mentioned several times, resetting the counter with Canon Pixma iP4700 service mode tool version 1.050 does not mean that the waste ink absorber is empty or clean. It only means that the counter is reset to zero. You still need to replace or clean the waste ink absorber pads periodically to prevent ink leakage and ensure optimal printing performance.
The waste ink absorber pads are sponge-like components that collect excess ink during printing and cleaning cycles. They are located inside your printer, under or near the print head. Over time, these pads get saturated with ink and become full or clogged. This can cause some problems or errors with your printer, such as:
Ink leakage from your printer, which can damage your printer's components, stain your furniture, or cause a fire hazard.
Poor print quality, such as smudges, streaks, blurs, or missing colors.
Print head clogging or damage, which can affect your printer's performance or functionality.
Error codes or messages on your screen, such as "Waste tank full" or "Ink absorber full".
Therefore, you should replace or clean the waste ink absorber pads after resetting the counter with Canon Pixma iP4700 service mode tool version 1.050. This will ensure that your printer works properly and safely.
How to access and remove the pads from your printer
To replace or clean the waste ink absorber pads, you need to access and remove them from your printer. To do that, follow these steps:
Turn off your printer and disconnect it from the power source and the computer.
Open the front cover of your printer and remove any paper from the paper tray.
Locate the print head and move it to the center of your printer by gently pushing it with your hand.
Look for a plastic cover under or near the print head that has some screws on it. This is where the waste ink absorber pads are located.
Remove the screws with a screwdriver and lift the plastic cover to expose the waste ink absorber pads.
Use a pair of tweezers or pliers to carefully pull out the waste ink absorber pads. There may be more than one pad, depending on your printer model. Be careful not to spill any ink or damage any other parts of your printer.
Place the waste ink absorber pads in a plastic bag or container and dispose of them properly. Do not flush them down the toilet or throw them in the trash, as they may contain harmful chemicals or cause environmental problems.
Here are some pictures of how to access and remove the waste ink absorber pads from your printer:
How to clean or replace the pads and reassemble your printer
After removing the waste ink absorber pads from your printer, you have two options: you can either clean them or replace them with new ones. Cleaning them may save you some money, but it may not be as effective or hygienic as replacing them. Replacing them may cost you some money, but it may ensure better printing quality and safety. The choice is yours.
To clean the waste ink absorber pads, follow these steps:
Wear gloves and protective clothing to avoid contact with ink or chemicals.
Rinse the waste ink absorber pads under running water until the water runs clear. You may need to squeeze or wring them gently to remove excess ink.
Soak the waste ink absorber pads in a solution of water and bleach for about 10 minutes. This will help disinfect and deodorize them.
Rinse the waste ink absorber pads again under running water and let them air dry completely.
To replace the waste ink absorber pads, follow these steps:
Buy new waste ink absorber pads that are compatible with your printer model. You can find them online or at your local printer supply store.
Insert the new waste ink absorber pads into the slots where you removed the old ones. Make sure they fit snugly and securely.
To reassemble your printer, follow these steps:
Replace the plastic cover over the waste ink absorber pads and secure it with the screws.
Move the print head back to its original position on the right side of your printer.
Close the front cover of your printer and reconnect it to the power source and the computer.
Turn on your printer and test it by printing a test page or a document.
Conclusion
In this article, we have shown you how to use Canon Pixma iP4700 service mode tool version 1.050 to reset the waste ink absorber counter for your printer. We have also explained how to put your printer in service mode, how to download and install the software, how to reset the waste ink absorber counter, and how to replace or clean the waste ink absorber pads.
We hope that this article has been helpful and informative for you. By following the instructions and tips that we have provided, you can save money and time by resetting the counter yourself instead of taking your printer to a service center or buying a new one. You can also extend the life of your printer and avoid wasting ink by resetting the counter before it reaches 100%. You can also print without interruption and avoid annoying error messages and codes by resetting the counter whenever you see a warning message.
However, you should also be aware of the risks and precautions of using Canon Pixma iP4700 service mode tool version 1.050. You should use this software at your own risk and discretion, as it is not authorized by Canon and may void your printer's warranty. You should also replace or clean the waste ink absorber pads after resetting the counter, as this will prevent ink leakage and ensure optimal printing performance. You should also download this software from a trusted and verified source, as some websites may contain malware or viruses that can harm your computer or steal your personal information.
If you have any questions or comments about this article or Canon Pixma iP4700 service mode tool version 1.050, feel free to leave them below. We would love to hear from you and share your experience with us. Thank you for reading and happy printing!
FAQs
What is the difference between service mode tool version 1.050 and version 3.400?
Service mode tool version 1.050 is an older version of the software that works